Cutting On Belt and Pinch and Grab Material Feed Cutting Machine

Cutting On Belt and Pinch and Grab Material Feed Cutting Machine

Cutting On Belt and Pinch and Grab Material Feed Cutting Machine is The special die cutting machine with cutting and feeding belt with pinch and grab feeding system.This kind cutting machine equiped with the tooling clamped to the upper head of the press and operating parameters pre-programmed.

The belt works as conveying belt which feed the material into the machine ,The upper head which mounted the cutting tooling will cutting on the belt which works as cutting surface.This system works very fast ,It is good for medium and very high volume production.It is good for sheet material and rolls material.

The operator can set the machine feed distance ,speed ,daylight etc.,Once the machine have set,The machine will wrok autoamticly .It feed the material into the head of press,Then cutting .after cutting ,The cut-out parts are collected on the outboard side.

The machine is good for cutting the material or used industry:

FSM custom build this model depends on customers needs: Feeding system,machine table size,hydraulic pressure etc.,

Model FSA-30 FSA-40 FSA-50 FSA-60 FSA-80 FSA-100 FSA-150(200) FSA-300(400,500)
Max Cutting Force(T) 30T 40T 50T 60T 80T 100T 150T, 200T 300T400,500T
Daylight(mm) 50-180 50-240 50-240 50-240 50-240 50-240 50-240 50-240
Cutting Area(mm) 1250×500 1250×600 1250×800 1250×800 1250×800 1250×900 1250×1000 1250×1500
1470×500 1470×600 1470×800 1470×800 1470×800 1470×900 1470×1000 1470×1500
1600×500 1600×600 1600×800 1600×800 1600×800 1600×900 1600×1000 1600×1500
Motor Power 1.5KW 3KW 4KW 5.5KW 7.5KW 7.5KW 11KW 22KW
Electric Voltage 3 phases x440/415/400/380/220/200V, 50/60 Hz
Machine Weight (KG) 1400 1700 2800 3500 5000 6500 9000 12000
1500 1800 3200 3800 5400 7000 9500 13000
1700 2000 3400 4200 5800 7500 10000 14000
Specification requirement welcome to contact FSM
 Since 1995 - 2018 Die cutting machine | Copyright © FSM Machine
top