Receding beam press

Receding beam press

Receding beam press is full beam press with receding beam.head.This receding beam press is working fast and flexible .It is a good die cutting machine with a big work surface for cutting. They can be used for small and big material, especially it is good working with big cutting dies or dies with multiple shapes .

The upper receding beam is motor driven forwards and backwards to reveal the cutting area so that perfect access and fully available for the cutting surface.It is easy for the woker to operate the machine .Just put the material onto the bed .Then the operator places the cutting die tool on the material, push the buttong,the head travels forward, down, and retracts to reveal the cut components.
Also the cutting die can die cut downwards, or upwards, and can also be clamped to the recend head if production needs, so that the operator donot need place the cutting die by hand.

This FSM hydraulic receding head press uses a four column strong construction which utilizes an internal mechanical levelling system to insure a parallel cutting stroke.Some time the operator donot put the cutting die at the center of the cutting area , a completely uniform pressure can be achieved throughout the cutting bed.

This FSM die cutting machine can be for a wide range of materials: foam, textiles, plastic, EVA,EPE,PVC,rubber, packings, vinyl, leather, composites, fiberglass, vinyl, and carpet floor tiles, cork, wood, gasket, filter materials, etc.,

Technical Information:

Model FH-30, 60,80,100,150,200,300
Max cutting force(Ton) 30T, 60T,80,100,150,200,300
Daylight(mm)  50-250 depending on machine option
Working area(mm) 1600×500,600,700,800,900,1000,1200,
1800×700,800,900,1000,1200, 1500
2000×700,800,900,1000,1200,1500,2000
Motor power 1.5 to 22KW
Machine Net weight (KG) 1400 to 16500
1500 to 17500
1700 to 18500

Related products:

 Since 1995 - 2018 Die cutting machine | Copyright © FSM Machine
top